Trees and Shrubs
||5 lbs. per inch of trunk diameter.
||Pour into holes (1” wide x 12” deep) spaced 2 feet apart along drip line.
||½ lb. per ft. of tree height.
||Mix with soil at the bottom of the planting hole prior to inserting the transplanted tree. 3 months later, hand spread an equal amount of Milorganite under slightly past the drip line.
The drip line on a tree is a ring on the ground directly below the outer circumference of the tree’s branches. Water your trees along their drip lines instead of at the base of their trunks to prevent root rot. For deciduous trees, extend a few feet beyond the drip line.
The 4% Iron in Milorganite is especially good for trees, like oaks, that thrive with iron in their diet.
|Established shrub beds
||5 lbs. per 100 ft2
||Scatter uniformly over the soil surface and work in with a hoe or rake. For individual shrubs, apply 1 lb. of Milorganite per shrub in the root area.
||½ lb. per ft. of shrub height.
||Loosely mix with soil at the bottom of the hole prior to inserting shrub. 3 months later, hand spread 2 lbs. of Milorganite under the plant and lightly rake into the soil.